Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' RED HT

Cutting Excellence of solids

Crafted to handle the most resilient solid materials, KINS’ RED HT effortlessly slices through tough solid carbon steel boasting a tensile strength exceeding 900 N/mm² on cutting machines. But there's more – this adaptable saw blade for solids is also the preferred option for cutting ferritic, martensitic, and duplex stainless steel bars exceeding a diameter of 35 mm. Featuring dedicated tooth geometries and a PVD coating, it ensures optimal blade longevity when cutting high-tensile carbon steel, all the while sustaining high productivity levels.

Upgrade your cutting experience

In this saw blade precision, durability, and performance are redefined. With suggested cutting speeds between 60 - 140 meters per minute and a tooth load between 0.05 - 0.09 mm/tooth, KINS' RED HT ensures precision and efficiency with every cut. This saw blade seamlessly fits at all major brands of stationary automatic sawing machines, including Nishijimax,Kasto, Exactcut, Tsune, Mega, Everising, Rattunde, Behringer, and more.

Benefits of KINS’ RED HT

New saw body design
New dedicated tooth geometries
New type of coating
Best blade life performances when cutting high tensile carbon steel
High productivity when cutting stainless steel

Applications and parameters

Hard solid carbon steel with a tensile strength higher than 900 N/mm² and ferritic, martensitic and duplex stainless steel bars Ø >35 mm on high performance machines
Suggested cutting speed: 60 – 140 m/min.
Tooth load ranging from 0.05 – 0.09 mm/tooth

KIN'S RED HT boasts versatility

KIN'S RED HT is tailored for high tensile solid materials, as well as ferritic, martensitic, and duplex stainless steel bars with a diameter of > 35 mm. It performs seamlessly with cutting speeds between 60 - 140 m/min, applying tooth loads from 0.05 - 0.09 mm/tooth. Common applications include:

Leaf suspensions
Drive shafts
Torsion bars
Special forging
Parts for machining

Typical steel grades

Ferritic stainless
Martensitic stainless
Duplex
Chrome Steel
Springsteel
High tensile
Hardened boron steels

Worldwide network

Find your distributorGet your saw blades

Typical machines

Manufacturer	Machine type
Amada	CM(B) series
Noritake	NCS-series
Behringer / Eisele	HCS-series
Mega	CS-series
Wagner / Trennjäger	SPA-series
Kasto	C-series
Everising	P-series
Nishisimax	NHC-series
Ficep	S-series
Tsune	TJ/TK-series
Exactcut	TAC series
Danobat / Plantool	VCS/QCS series

STANDARD RANGE KINS’ RED HT

Diameter (mm)	Kerf (mm)	No. of teeth (Z)
250	2,0 / 1,7	60 / 72 / 80 / 100
285	2,0 / 1,7	60 / 72 / 100 / 120
315	2,4 / 2,0 2,6 / 2,25	60
315	2,3 / 2,0 2,5 / 2,25	72 / 80
315	2,3 / 2,0	100 / 120
350	2,8 / 2,5	60
350	2,7 / 2,5	80 / 100 / 120
360	2,6 / 2,25	60
360	2,5 / 2,25	80 / 100 / 120 / 140
370	2,4 / 2,0	60
370	2,3 / 2,0	80 / 100 / 120
380	2,6 / 2,25	60
380	2,5 / 2,25	80 / 100 / 120
400	2,7 / 2,5	60 / 80 / 100
420	2,7 / 2,25	50 / 60 / 80 / 100
425	2,7 / 2,25	50 / 60 / 80 / 100
460	2,8 / 2,25	50
460	2,7 / 2,25	60 / 80 / 100 / 120
480	2,7 / 2,25	50 / 60 / 80 / 100
500	3,5 / 3,0	80
520	3,8 / 3,2	50
520	3,0 / 2,5	72 / 80
560	3,8 / 3,2	60
560	3,0 / 2,5	72 / 80
560	3,7 / 3,2	100
560	3,0 / 2,5	120
580	3,2 / 2,7	60 / 72 / 80 / 100
630	3,2 / 2,7	60 / 72 / 80 / 100
650	3,7 / 3,2	80 / 130
750	3,8 / 3,2	60 / 72 / 80 / 100