Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' RED LT Performance

Precision and efficiency united

KINS’ RED LT Performance is your solution for precision and excellence when cutting low tensile solid steel. Crafted to cut steel grades with a carbon content of less than 0.60%, the KINS’ RED LT Performance saw blade excels at solid cutting applications with a tensile strength between 400 - 750 N/mm².

ULTRA SMOOTH CUTTING SURFACE

KINS’ RED LT Performance is developed to deliver an ultra-smooth cutting surface while applying cutting speeds between 100 – 280 m/min and a tooth load ranging from 0.05 - 0.10 mm/tooth. Typical products are: hydraulic cylinders, wheel hubs, bolts, flanges, axles and crankshafts.

Engineered to excel in a multitude of industries, the KINS’ RED LT Performance saw blade is the primary choice for steel service centers, forging operations, automotive & truck manufacturing, windmill production and machinery.

Advantages of the KINS' RED LT Performance

Specifically designed for cutting low tensile carbon solid steel
Effective on high performance machines
Smooth cutting surface
Tighter squareness tolerance, therefore resulting in a longer blade life
Because the cut surface is as close to the end stage as possible, you will minimize or avoid post-machining, save cycle time and tool costs

Applications for KINS’ RED LT Performance

Cutting low tensile carbon steel (< 0.60%) solids
Suggested cutting speed: 100 – 280 m/min
Tooth load ranging from: 0.05 – 0.10 mm/tooth

Saw blade to cut low tensile solid steel

KINS’ RED LT Performance is ideally suited for cutting solid steel with low tensile strengths between 400 – 750 N/mm² (carbon content < 0.60%) on a wide range of solid cutting applications like:

Hydraulic cylinders
Bearing housing and wheels
Wheel hubs
Gear wheels
Mechanical parts
Bolts, nuts, fittings, couplings, flanges, hubs
Axles, drive shafts, crankshafts

Typical steel grades for KINS’ RED LT Performance

Mild steel
Plain carbon steel
Non alloyed steel
Free cutting steel
Low carbon steel
Structural steel
Medium carbon steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer	Machine type
Amada	CM(B) series up to CM(B)150
Noritake	NCS-series up to NCS150
Behringer / Eisele	HCS-series up to HCS150
Mega	CS-series up to CS150
Wagner / Trennjäger	SPA-series up to SPA150
Kasto	(vario-/grip-) speed C-series up to speed C15
Everising	P-series up to P150
Nishisimax	NHC-series up to NHC150
Ficep	S-series up to S50
Tsune	TJ/TK-series up to TJ/TK150
Exactcut	TAC series up to TAC155
Danobat / Plantool	VCS/QCS series

STANDARD Range KINS’ RED LT Performance

Diameter (mm)	Kerf (mm)	Bore hole (mm)	Pinholes	No. of teeth (Z)
285	2,0/1,7	32	4/9/50 \| 4/11/63	60
285	2,0/1,7	32	4/9/50 \| 4/11/63	80
315	2,3/2,0	32	4/9/50 \| 4/11/63	60
315	2,3/2,0	32	4/9/50 \| 4/11/63	80
360	2,7/2,25	40	4/12/90 \| 4/16/80	60
360	2,7/2,25	40	4/12/90 \| 4/16/80	80
360	2,7/2,25	50	4/12/90 \| 4/16/80	60
360	2,7/2,25	50	4/12/90 \| 4/16/80	80
460	2,7/2,25	50	4/14/90 \| 4/16/80	60
460	2,7/2,25	50	4/14/90 \| 4/16/80	80