Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' ORANGE SpeedMaster Performance

Single and Twin cut-off for thin wall profiles and tubes

Enhance your tube mill operations with the KINS’ ORANGE SpeedMaster Performance saw blades. Designed for superior performance in flying cut-off applications, it delivers shortest cut-times on carbon steel rectangular or square hollow sections and thin-wall tubes. Applicable on medium and high tensile strengths steels for both single and twin flying cut-off machines.

KINS’ ORANGE SpeedMaster Performance goes beyond

The KINS’ ORANGE SpeedMaster Performance has a smaller tooth pitch than the standard KINS ORANGE SpeedMaster. This allows shorter cut times to reach higher line speeds or cut shorter product lengths (e.g., 4–6 meters).

The KINS’ ORANGE SpeedMaster Performance is meant for high speed tube mills and direct forming lines, where short cutting times are key in reducing time to regain cost of capital investment. This saw blade leaves a smooth burr free surface finish and delivers lowest cost per cut due to exceptional bladelife.

Optimized for cutting tubes with tensile strengths up to 1,200 N/mm², the KINS’ ORANGE SpeedMaster Performance is the ultimate solution for today’s high-speed tube mill operations.

Operating at suggested cutting speeds of 250 - 400 m/min and a variable tooth load from 0.04 mm/tooth up to 0.20 mm/tooth, KIN'S ORANGE SpeedMaster Performance guarantees highest uptime meaning a most cost effective solution for your tube mill.

Improve your cutting process with KINS’ ORANGE SpeedMaster Performance

Extremely high line speed because of very short cutting times
Very good surface finish, burr-free cut
Tensile strength up to 1,200 N/mm²
Increased uptime and production

Cutting applications for KINS’ ORANGE SpeedMaster Performance

The KINS’ ORANGE SpeedMaster Performance is specifically designed for hollow sections and thin walled tubes. Therefore, it has a smaller tooth pitch and more teeth than the standard KINS’ ORANGE SpeedMaster, making it highly effective for the demands of these applications. This saw blade is the perfect solution for cutting tubes with no ID-scarf, handling tensile strengths of up to 1,200 N/mm². Ideal for both single and twin flying cut-off applications, with cutting speeds of 250–400 m/min and variable tooth load from 0.04 mm/tooth up to 0.20 mm/tooth. Primary applications are: construction, fencing, internal transport, furniture, and automotive.

Cutting tubes with a tensile strength up to 1,200 N/mm² with no ID-scarf on single and twin flying cut-off machines
Cutting speed: 250 – 400 m/min
Variable tooth load 1/2/3: relation 1/2/0.8. Example: TL1/TL2/TL3 = 0.05 / 0.10 / 0.04 mm/tooth.

Typical steel grades for KINS’ ORANGE SpeedMaster Performance

Low carbon steel
High carbon steel
Boron steel
Low-alloy high-strength steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer	Machine type
Fives OTO Mills	TAGB141, TAGB161, TAC80 (twin), TAC90 (twin)
MTM	A100, A171
Asmag / Seuthe	TSR- and SCO- models
Olimpia80	RCF series
Elmasksan	ELBM series

STANDARD RANGE KINS’ ORANGE SPEEDMASTER PERFORMANCE

Diameter (mm)	Kerf (mm)	Bore hole (mm)	Pinholes	No. of teeth (Z)
315	2,8/2,5	32	2/9/45 4/11/63	110
350	2,8/2,5	32	2/9/45 4/11/63	120
350	2,8/2,5	50	4/16/80 4/15/90	120
450	2,8/2,5	50	4/16/80	120
400	2,8/2,5	50	4/16/80 4/15/90	140
450	2,8/2,5	50	4/16/80	160
450	2,8/2,5	80	4/23/120	160
500	2,8/2,5	50	4/16/80	170
500	2,8/2,5	90	3/13/160	170
560	3,6/3,2	50	4/16/80	170
560	3,6/3,2	80	4/23/120	170
560	3,6/3,2	90	3/13/160	170
560	3,6/3,2	140	4/17,5/170	170
600	3,6/3,2	50	4/16/80	180
600	3,6/3,2	80	3/13/160	180
600	3,6/3,2	90	3/13/160	180
600	3,6/3,2	120	4/15/190	180
600	3,6/3,2	140	4/17,5/170	180
630	3,6/3,2	80	3/13/160	190
650	3,6/3,2	90	3/13/160	200
650	3,6/3,2	120	4/15/190	200