Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' ORANGE SpeedMaster

Single and Twin cut-off without inside scarf

Elevate your tube mill process with the KINS’ ORANGE SpeedMaster saw blade. Precision-crafted for exceptional performance on flying cut-off applications.

Ultimate FLYING CUT-OFF SOLUTION for HIGH SPEED steel cutting

This saw blade is your ultimate flying cut-off solution. With fast cutting times, it enables an extraordinary high line speed and ensures a pristine surface finish with minimum cuts. These saw blades are designed for flying cut-off applications with a tensile strength up to 1,000 N/mm² and no ID-scarf. KINS’ ORANGE SpeedMaster enables high tube line speeds and reduces significantly production costs.

Operating at suggested cutting speeds of 250 - 400 m/min and a variable tooth load between 0.04 - 0.10 N/mm², KIN'S ORANGE SpeedMaster guarantees increased uptime and provides a cost-effective solution for tube mill needs.

Improve your cutting process with KINS’ ORANGE SpeedMaster

Extremely high line speed because of very short cutting times
Very good surface finish, burr-free cut
Tensile strength up to 1,000 N/mm²
Increased uptime

Cutting applications for KINS’ ORANGE SpeedMaster

KINS’ ORANGE SpeedMaster is the optimal choice for cutting tubes with little to no ID-scarf up to 1,000 N/mm² on single and twin flying cut-off applications. This saw blade has the capability to handle cutting speeds of 250 – 400 m/min with a variable tooth load ranging from 0.04 – 0.10 mm/tooth. An ideal saw blade for applications like scaffolding, furniture, automotive tubes, structural, mine bolts and freeform profiles.

Cutting tubes with a tensile strength up to 1,000 N/mm² and little to no ID-scarf on single and twin flying cut-off machines
Cutting speed: 250 – 400 m/min
Variable tooth load 1/2/3: relation 100%/200%/0.8% - 0.05/0.10/0.04 mm/tooth.

Typical steel grades for KINS’ ORANGE SpeedMaster

Low carbon steel
High carbon steel
Boron steel
Low-alloy high-strength steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer	Machine type
Fives OTO Mills	TGB161, TGB161, TAC80 (twin), TAC90 (twin)
MTM	A100, A171
Asmag / Seuthe	TSR34, TSR64, TSR95, TSR114
Olimpia80	RCF series
Elmasksan	ELBM series

STANDARD RANGE KINS’ ORANGE SPEEDMASTER

Diameter (mm)	Kerf (mm)	Number of teeth (Z)
285	2,0	100
315	2,2	100
350	2,7 / 2,8 / 2,3 / 2,6 / 2,8	80 / 100 / 100
400	3,6 / 2,8 / 2,3	100 / 120 / 140
425	2,8	100
450	3,6 / 2,8	110 / 130 / 140 / 150
460	2,8	130 / 150
500	3,4 / 3,6	120 / 140 / 160
520	3,6	160
560	3,6	120 / 140 / 170
600	3,6	150 / 170 / 180 / 190 / 200
630	3,6	160
650	3,6	150
690	3,6	150 / 170