Thin dedicated PVD coating for cutting (stainless) steel tubes & profiles

 

A dedicated low friction, thin PVD coating with a very high temperature resistance, as well as a stable, flat hub and improved conicity of the cutting area enable the X-treme NX saw blade to cut stainless steel tubes and profiles.

Advantages:

  • Thin PVD coating, specifically designed for cutting stainless steel
  • Extremely narrow tolerances in blade thickness
  • Optimized surface finish
  • Very low friction coefficient
  • Improved blade tensions
  • Narrow tolerances in side run-out
  • High temperature resistance
  • Stable flat hub for high stability
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available

 

Applications:

  • (Stainless) steel tubes, profiles and sticky materials
  • Suggested cutting speed:
    Austenitic stainless steel (300 series) 30 – 50 m/min
    Ferritic w/o Ti (409 & 412) 220 – 260 m/min
    Ferritic with Ti (441) 60 – 120 m/min
  • Machines: High quality automatic

 

OVERVIEW DIAMETERS HSS X-TREME NX SAW BLADES
Diameter
(mm)
Kerf
(mm)
Bore hole
(mm)
Teeth
225 2,5 32 / 40 64 / 80 / 120 / 150 / 180 / 220
315 2,0 / 2,5 32 / 40 72 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 200 / 250 / 320
350 2,0 / 2,5 32 / 40 / 50 80 / 90 / 110 / 120 / 140 / 160 / 180 / 220 / 280 / 350
370 2,5 40 / 50 70 / 80 / 90 / 100 / 110 / 120 / 140 / 160 / 190 / 220 / 300
400 2,5 / 3,0 40 / 50 70 / 80 / 90 / 100 / 128 / 140 / 160 / 180 / 200 / 250 / 320
425 2,5 / 3,0 32 / 40 / 50 70 / 80 / 100 / 110 / 120 / 130 / 140 / 160 / 180 / 220 / 260 / 350