Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' RED Stainless Small

Stainless Steel Excellence in Every Cut

Crafted with cutting-edge technology, this carbide-tipped and PVD-coated blade is developed for austenitic stainless steel solids, as well as ferritic, martensitic, and duplex stainless steel solids with diameters up to 35 mm.

Read more Show less

  • Austenitic Stainless

  • Non-Austenitic Stainless

  • Small Diameter

  • Large Diameter

Get your bladeGet your blade
Get your bladeGet your blade

Cutting austenitic, ferritic, martensitic, and duplex stainless steel within smaller diameter ranges

The benefit from high production rates and impeccable surface finishes are realized by its dedicated tooth geometry. The KINS’ RED Stainless Small saw blade excels when it comes to cutting austenitic, ferritic, martensitic, and duplex stainless steel within smaller diameter ranges.

With suggested cutting speeds ranging from 80 - 140 m/min and a tooth load varying from 0.03 - 0.06 mm/tooth, this saw blade ensures precision and efficiency with every cut. It's compatible with a wide range of stationary automatic sawing machines, including Tsune, Amada, Mega, Kasto, Behringer, Exactcut, and Everising.

Elevate your stainless steel cutting process with KINS’ RED Stainless Small – precision, productivity, and performance, redefined.

ADVANTAGES OF KINS’ RED STAINLESS SMALL

  • Best saw blade when cutting ferritic, martensitic and duplex stainless steel at smaller diameter ranges
  • Specifically developed for stainless steel solids with a diameter ≤ 35 mm
  • Dedicated tooth geometry

APPLICATIONS FOR KINS’ RED STAINLESS SMALL

  • Austenitic, ferritic, martensitic and duplex stainless steel bars with a diameter ≤ 35 mm
  • Suggested cutting speed: 80 – 140 m/min
  • Tooth load ranging from 0.03 – 0.06 mm/tooth

A SAW BLADE TO CUT STAINLESS STEEL BARS

Ideal for cutting stainless steel bars up to 35 mm in diameter, KINS’ RED Stainless Small can cope with cutting speeds between 80-140 m/min and a tooth load between 0.03 - 0.06 mm/tooth. Achieve top-notch results with ease. Typical applications for this saw blade are cutting parts for machining to length.

Typical steel grades

  • Austenitic Stainless
  • Ferritic Stainless
  • Martensitic stainless
  • Duplex Stainless

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type

Amada

CM(B) series

Noritake

NCS-series

Behringer / Eisele

HCS-series

Mega

CS-series

Wagner / Trennjäger

SPA-series

Kasto

 C-series

Everising

P-series up

Nishisimax

NHC-series

Ficep

S-series

Tsune

TJ/TK-series

Exactcut

TAC series

Danobat / Plantool

VCS/QCS series

STANDARD RANGE KINS’ RED STAINLESS Small

Diameter (mm) Kerf (mm) No. of teeth (Z)
250 2,0 / 1,7 60 / 72 / 80 / 100
285 2,0 / 1,7 60 / 72 / 100 / 120
315 2,4 / 2,0  2,6 / 2,25 60
315 2,3 / 2,0  2,5 / 2,25 72 / 80
315 2,3 / 2,0 100 / 120
350 2,8 / 2,5 60
350 2,7 / 2,5 80 / 100 / 120
360 2,6 / 2,25 60
360 2,5 / 2,25 80 / 100 / 120 / 140
370 2,4 / 2,0 60
370 2,3 / 2,0 80 / 100 / 120
380 2,6 / 2,25 60
380 2,5 / 2,25 80 / 100 / 120
400 2,7 / 2,5 60 / 80 / 100
420 2,7 / 2,25 50 / 60 / 80 / 100
425 2,7 / 2,25 50 / 60 / 80 / 100
460 2,8 / 2,25 50
460 2,7 / 2,25 60 / 80 / 100 / 120
480 2,7 / 2,25 50 / 60 / 80 / 100
500 3,5 / 3,0 80
520 3,8 / 3,2 50
520 3,0 / 2,5 72 / 80
560 3,8 / 3,2 60
560 3,0 / 2,5 72 / 80
560 3,7 / 3,2 100
560 3,0 / 2,5 120
580 3,2 / 2,7 60 / 72 / 80 / 100
630 3,2 / 2,7 60 / 72 / 80 / 100
650 3,7 / 3,2 80 / 130
750 3,8 / 3,2 60 / 72 / 80 / 100

KINS' RED Stainless Small is formerly known as: CX6S

Discover other products

KINS' RED HT

  • Medium Tensile

  • High Tensile

  • Austenitic Stainless

  • Non-Austenitic Stainless

KINS' RED Stainless Large

  • Austenitic Stainless

  • Non-Austenitic Stainless

  • Small Diameter

  • Large Diameter

Explore the possibilities within our wide range to optimize your sawing process

By exploring our sawing blades you can discover new ways to enhance efficiency, precision, and TCO of your sawing processes.

Read more about us