Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' GREEN Performance

Low friction to cut harder materials

Introducing the KINS' GREEN Performance saw blade, designed for cutting low and medium tensile carbon tubes. Unlocking exceptional performance, because it thrives in applications with extremely high cutting speeds and tooth loads. This saw blade ensures a prolonged blade life and increased uptime.

Read more Show less

  • Low Tensile

  • Medium Tensile

  • Cutting Speed

  • Blade Life

  • Tube

  • Thin Tube

Get your bladeGet your blade
Get your bladeGet your blade

Very high hardness and temperature resistance

Due to a special, wear resistant, multilayer PVD coating with a low friction coefficient, this saw blade has very high hardness and it is very high temperature resistance. KINS' GREEN Performance can be used for on exceptionally demanding cutting applications.

With reduced side pick-up, a low friction coefficient, and impressive wear resistance, this saw blade stands out. For maximum results, apply the saw blade with spray mist or emulsion coolant. Additionally, a recoating program is available for relevant applications.

Embrace efficiency and performance with suggested cutting speeds of 120-200 m/min and tooth loads ranging from 0.04 to 0.18 mm/tooth. This versatile saw blade is ideal for cutting medium to high tensile carbon steel tubes on (semi) automatic sawing machines and flying cut-off applications.

ADVANTAGES OF KINS’ GREEN PERFORMANCE

  • High blade life
  • Increased uptime
  • Reduced side pick-up
  • Low friction coefficient
  • Wear resistant
  • Very high temperature resistance
  • Suitable for extremely high cutting speeds and feeds
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available

 

APPLICATIONS FOR KINS’ GREEN PERFORMANCE

  • Cutting low to medium tensile carbon tubes
  • Suggested cutting speed: 120 – 200 m/min
  • Tooth load ranging from: 0.04 – 0.18 mm/tooth

KINS’ GREEN Performance is ideally suited for cutting low to medium tensile tubes steel tubes and profiles on (semi) automatic sawing machines and flying cut-off applications

TYPICAL INCLUDED APPLICATIONS

  • Furniture
  • Automotive tubes
  • Structurals
  • Mine bolts
  • Freeform profiles
  • Food sector
  • Chemical industry
  • Exhaust system

TYPICAL STEEL GRADES FOR KINS’ GREEN PERFORMANCE

  • Low carbon steel
  • Medium carbon steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type

Adige

TS series, CM series

Asmag

TSR34, TSR64, TSR95, TSR114

Bewo

DCH series, SCF series

Elmaksan

ELBM series

MTM

A100, A171, A206, A208

Olimpia80

RCF series

Fives OTO Mills

TGB161, TAC80 (twin), TAC90 (twin),

Rattunde

ACS series

RSA

Rasacut series

Sinico

TOP series

STANDARD RANGE KINS’ GREEN PERFORMANCE

Diameter (mm) Kerf (mm) Bore hole (mm) Pinholes
160 1,2 32 1/8.5/50 1/9/60 | 2/9/45 2/12/64 4/10/50
167 1,6 32 1/8.5/50 1/9/60 | 2/9/45 2/12/64 4/10/50
200 2,0 32 2/9/45 2/12/64 4/10/50
225 2,0 32 | 40 2/9/45 2/12/64 4/10/50 | 2/9/45 2/12/64 4/10/50
250 1,6 25,4 | 32 | 40 2/9/45 4/7/50 | 2/9/45 2/12/64 4/10/50 | 2/9/55 4/12/64
250 2,0 25,4 | 32 | 40 2/9/45 4/7/50 | 2/9/45 2/12/64 4/10/50 | 2/9/55 4/12/64
250 2,5 25,4 | 32 | 40 2/9/45 4/7/50 | 2/9/45 2/12/64 4/10/50 | 2/9/55 4/12/64
275 2,0 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
275 2,0 40 2/9/55 4/12/64
275 2,5 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
275 2,5 40 2/9/55 4/12/64
300 2,0 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
300 2,0 40 2/9/55 4/12/64
300 2,5 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
300 2,5 40 2/9/55 4/12/64
315 2,0 32 2/9/45 2/12/64 4/10/50 | 2/9/55 2/15/80 4/12/64
315 2,0 40 2/9/55 4/12/64
315 2,5 32 2/9/45 2/12/64 4/10/50 | 2/9/55 2/15/80 4/12/64
315 2,5 32 4/10/50 4/12/64
315 2,5 40 2/9/55 4/12/64
350 2,0 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
350 2,0 40 2/9/55 4/12/64
350 2,0 50 4/15/80 4/15/85
350 2,5 32 2/9/45 2/12/64 4/10/50
350 2,5 40 2/9/55 4/12/64
350 2,5 50 4/15/80 4/15/85
370 2,5 32 2/9/45 2/12/64 4/10/50
370 2,5 40 2/9/55 4/12/64
370 2,5 50 4/15/80 4/15/85
370 3,0 32 2/9/45 2/12/64 4/10/50
370 3,0 40 2/9/55 2/15/80 4/12/64
370 3,0 50 4/15/80 4/15/85
400 2,5 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
400 2,5 40 2/9/55 2/15/80 4/12/64
400 2,5 50 4/15/80 4/15/85
400 3,0 32 2/9/45 2/12/64 4/10/50 | 4/10/50 4/12/64
400 3,0 40 2/9/55 2/15/80 4/12/64
400 3,0 50 4/15/80 4/15/85
425 2,5 50 4/15/80 4/15/85
450 2,5 32 2/9/45 2/12/64 4/10/50
450 2,5 40 2/15/80 2/15/100 4/12/64
450 2,5 50 4/15/80 4/15/85
450 3,0 32 2/9/45 2/12/64 4/10/50
450 3,0 40 2/15/80 2/15/100 4/12/64
450 3,0 50 4/15/80 4/15/85
500 3,0 50 4/15/80 4/15/85
525 3,0 50 4/15/80 4/15/85
560 3,5 50 4/15/80 4/15/85
560 3,5 140 4/18/170
600 3,5 50 4/15/80 4/15/85
600 3,5 90 3/13/160
600 3,5 140 4/18/170

KINS' GREEN Performance is formerly known as: Fusion 2.0

Discover other products

KINS' GREEN Stainless Performance

  • Stainless Steel

  • Cutting Speed

  • Blade Life

  • Tube

  • Thin Tube

KINS' GREEN Stabilizer

  • Low Tensile

  • Medium Tensile

  • Cutting Speed

  • Blade Life

  • Tube

  • Thin Tube

KINS' GREEN Stainless Stabilizer

  • Stainless Steel

  • Cutting Speed

  • Blade Life

  • Tube

  • Thin Tube
Need help with selecting a blade? Try our blade selector

KINS' GREEN Universal

  • Low Tensile

  • Medium Tensile

  • Stainless Steel

  • Cutting Speed

  • Blade Life

KINS' GREEN Vapor

  • Low Tensile

  • Medium Tensile

  • Stainless Steel

  • Cutting Speed

  • Blade life

Explore the possibilities within our wide range to optimize your sawing process

By exploring our sawing blades you can discover new ways to enhance efficiency, precision, and TCO of your sawing processes.

Read more about us