Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' BLUE HT Stabilizer

CUTTING HIGH-HARDNESS TUBES EFFICIENTLY ON MACHINES WITH HIGH PERFORMANCE

Introducing the KINS’ BLUE HT Stabilizer saw blade, precision-engineered for cutting thin-walled (< 2.5 mm) high tensile (>1,000 N/mm2) tubes and less stable, high-hardness hollow sections on high-performance sawing machines. Its light cutting properties make it ideal for a wide range of automatic sawing machines. 

Read more Show less

  • Low/Medium Tensile

  • High Tensile

  • Cutting Speed

  • Blade Life

  • Tube

  • Thin Tube

Get your bladeGet your blade
Get your bladeGet your blade

KINS’ BLUE HT STABILIZER 

With suggested cutting speeds from 160 to 280 m/min and a tooth load ranging from 0.025 to 0.12 mm/tooth, the KINS’ BLUE HT Stabilizer is versatile and efficient. Variable feed is advised. 

Compatible with machine brands like Rattunde, Sinico, Bewo, RSA and Adige, it ensures precision in every cut. The KINS’ BLUE HT Stabilizer regulates the cutting process and avoids vibrations by a reduced cutting force and lower torque. 

ADVANTAGES OF THE KINS’ BLUE HT STABILIZER 

  • Specifically designed for cutting thin-walled and less stable tubes and hollow sections 
  • Light cutting properties 
  • Perfectly adapted for a diverse range of automatic cut-off machines. 
     

SUITABLE APPLICATIONS FOR KINS’ BLUE HT STABILIZER 

  • Cutting thin walled high hardness tubes on lighter machines. 
  • Cutting less stable, high hardness hollow sections on high performance machines 
  • Suggested cutting speed: 160 – 280 m/min. 
  • Tooth load ranging from:  0.025 – 0.12 mm/tooth 

THE MAIN INDUSTRIES FOR KINS’ BLUE HT STABILIZER ARE: 

Crafted for cutting thin-walled and less stable tubes, KINS’ BLUE HT Stabilizer delivers efficiency at suggested cutting speeds of 160-280 m/min and a tooth load ranging from 0.025 to 0.12 mm/tooth. Typical (high tensile) applications include: 

  • Automotive tubes 
  • Seating components, headrests 
  • High pressure tubes 
  • Rigid and high torque tubes 

TYPICAL STEEL GRADES FOR KINS’ BLUE HT STABILIZER 

  • High Carbon Steel 
  • High Strength Low Alloy (HSLA) 
  • Advanced High Strength Steel (AHSS) 
  • Manganese alloyed steel 
  • Boron alloyed steel 
  • Dual Phase 

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type
Rattunde ACS series
Sinico TOP series
Bewo DCH series, SCF series
RSA Rasacut series
Soco SA series
Adige / BLM TS series, CM series

STANDARD RANGE KINS’ BLUE HT Stabilizer

Diameter (mm) Kerf (mm) Number of teeth (Z)
250 2,0 / 1,7 100 / 120
385 2,0 /  1,7 80 / 100 / 120
315 2,3 / 2,0 100 / 120 / 150
350 2,7 / 2,5 / 2,3 / 2,0 100 / 120 / 150
360 1,6 / 2,25 100 / 120 / 140
370 2,6 / 2,25 126 / 140 / 180
400 2,6 / 2,25 / 2,7 / 2,5 / 2,6 / 2,25 140 / 160 / 190
420 2,6 / 2,25 120 / 144 / 160
450 2,6 / 2,25 170
500 2,6 / 2,25 200

KINS' BLUE HT Stabilizer was: CX5