KINS' RED HT

Cutting Excellence of solids

Crafted to handle the most resilient solid materials, KINS’ RED HT effortlessly slices through tough solid carbon steel, boasting a tensile strength exceeding 900 N/mm² on cutting machines. But there's more – this adaptable saw blade for solids is also the preferred option for cutting ferritic, martensitic, and duplex stainless steel bars exceeding a diameter of 35 mm. Featuring dedicated tooth geometries and a PVD coating, it ensures optimal blade longevity when cutting high-tensile carbon steel, all the while sustaining high productivity levels.

Read more Show less
  • Medium Tensile

  • High Tensile

  • Austenitic Stainless

  • Non-Austenitic Stainless

Upgrade your cutting experience

In this saw blade precision, durability, and performance are redefined. With suggested cutting speeds between 60 - 140 meters per minute and a tooth load between 0.05 - 0.09 mm/tooth, KINS' RED HT ensures precision and efficiency with every cut. This saw blade seamlessly fits at all major brands of stationary automatic sawing machines, including Nishijimax,Kasto, Exactcut, Tsune, Mega, Everising, Rattunde, Behringer, and more.

Benefits of KINS’ RED HT

  • New saw body design
  • New dedicated tooth geometries
  • New type of coating
  • Best blade life performances when cutting high tensile carbon steel
  • High productivity when cutting stainless steel

Applications and parameters

  • Hard solid carbon steel with a tensile strength higher than 900 N/mm2 and ferritic, martensitic and duplex stainless steel bars Ø >35 mm on high performance machines
  • Suggested cutting speed: 60 – 140 m/min.
  • Tooth load ranging from 0.05 – 0.09 mm/tooth

KIN'S RED HT boasts versatility

KIN'S RED HT is tailored for high tensile solid materials, as well as ferritic, martensitic, and duplex stainless steel bars with a diameter of > 35 mm. It performs seamlessly with cutting speeds between 60 - 140 m/min, applying tooth loads from 0.05 - 0.09 mm/tooth. Common applications include:

  • Leaf suspensions
  • Drive shafts
  • Torsion bars
  • Special forging
  • Parts for machining

Typical steel grades

  • Ferritic stainless
  • Martensitic stainless
  • Duplex
  • Chrome Steel
  • Springsteel
  • High tensile
  • Hardened boron steels

Typical machines

Manufacturer Machine type

Amada

CM(B) series

Noritake

NCS-series

Behringer / Eisele

HCS-series

Mega

CS-series

Wagner / Trennjäger

SPA-series

Kasto

C-series

Everising

P-series

Nishisimax

NHC-series

Ficep

S-series

Tsune

TJ/TK-series

Exactcut

TAC series

Danobat / Plantool

VCS/QCS series

STANDARD RANGE KINS’ RED HT

Diameter (mm) Kerf (mm) No. of teeth (Z)
250 2,0 / 1,7 60 / 72 / 80 / 100
285 2,0 / 1,7 60 / 72 / 100 / 120
315 2,4 / 2,0  2,6 / 2,25 60
315 2,3 / 2,0  2,5 / 2,25 72 / 80
315 2,3 / 2,0 100 / 120
350 2,8 / 2,5 60
350 2,7 / 2,5 80 / 100 / 120
360 2,6 / 2,25 60
360 2,5 / 2,25 80 / 100 / 120 / 140
370 2,4 / 2,0 60
370 2,3 / 2,0 80 / 100 / 120
380 2,6 / 2,25 60
380 2,5 / 2,25 80 / 100 / 120
400 2,7 / 2,5 60 / 80 / 100
420 2,7 / 2,25 50 / 60 / 80 / 100
425 2,7 / 2,25 50 / 60 / 80 / 100
460 2,8 / 2,25 50
460 2,7 / 2,25 60 / 80 / 100 / 120
480 2,7 / 2,25 50 / 60 / 80 / 100
500 3,5 / 3,0 80
520 3,8 / 3,2 50
520 3,0 / 2,5 72 / 80
560 3,8 / 3,2 60
560 3,0 / 2,5 72 / 80
560 3,7 / 3,2 100
560 3,0 / 2,5 120
580 3,2 / 2,7 60 / 72 / 80 / 100
630 3,2 / 2,7 60 / 72 / 80 / 100
650 3,7 / 3,2 80 / 130
750 3,8 / 3,2 60 / 72 / 80 / 100

KINS' RED HT is formerly known as: CX1H