Search

SearchSearch
Need help with an alternative? Contact an expert
Back to overview

KINS' RED MT

Precision Meets Durability

Introducing the KINS’ RED MT saw blade – your cutting solution for solid carbon steel with a carbon content below 0.60% and a tensile strength ranging from 600 - 900 N/mm². Engineered for high productivity, it's the go-to saw blade when you need performance and longevity across a wide variety of materials. With suggested cutting speeds between 100 - 280 meters per minute and a tooth load varying from 0.05 - 0.10 mm/tooth for the best possible performance, the KINS’ RED MT saw blade ensures precision and efficiency with every cut.

Read more Show less

  • Low Tensile

  • Medium Tensile

  • Blade Life

  • Tight Tolerance

Get your bladeGet your blade
Get your bladeGet your blade

SUITED TO CUT A WIDE ARRAY OF MEDIUM TENSILE SOLID MATERIALS

KINS' RED MT is versatile and suited for a wide array of medium tensile solid materials, with cutting speeds within the range of 100 - 280 m/min and tooth loads of 0.05 - 0.10 mm/tooth. 

This saw blade seamlessly integrates with all renowned brands of stationary automatic sawing machines, including Nishijimax, Tsune, Mega, Everising, Rattunde, Behringer, and more. Elevate your cutting capabilities to a whole new level with KINS’ RED MT – where precision meets durability for unmatched performance.

Advantages of KINS’ RED MT

  • Engineered for precision cutting of medium tensile solid carbon steel
  • High productivity
  • Smooth cutting surface
  • Best blade life performances when a wider range of materials needs to be cut

Applications that fit KINS’ RED MT

  • Specifically designed for cutting solid carbon steel (< 0.60%)
  • Best performing at low to medium tensile strengths between 600 – 900 N/mm2
  • Suggested cutting speed: 100 – 280 m/min
  • Tooth load ranging from: 0.05 – 0.10 mm/tooth

Typical applications

  • Hydraulic cylinders
  • Bearing housing and wheels
  • Wheel hubs
  • Gear wheels
  • Mechanical parts
  • Bolts, nuts, fittings, couplings, flanges, hubs
  • Axles, drive shafts, crankshafts

Typical steel grades

  • Mechanical Engineering steel
  • Medium carbon steel
  • Low alloyed steel
  • Medium alloyed steel
  • Bearing steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer Machine type

Amada

CM(B) series up to CM(B)150

Noritake

NCS-series up to NCS150

Behringer / Eisele

HCS-series up to HCS150

Mega

CS-series up to CS150

Wagner / Trennjäger

SPA-series up to SPA150

Kasto

 (vario-/grip-) speed C-series up to speed C15

Everising

P-series up to P150

Nishisimax

NHC-series up to NHC150

Ficep

S-series up to S50

Tsune

TJ/TK-series up to TJ/TK150

Exactcut

TAC series up to TAC155

Danobat / Plantool

VCS/QCS series

STANDARD RANGE KINS’ RED MT

Diameter (mm) Kerf (mm) No. of teeth (Z)
250 2,0 / 1,7 60 / 72 / 80 / 100
285 2,0 / 1,7 60 / 72 / 100 / 120
315 2,4 / 2,0  2,6 / 2,25 60
315 2,3 / 2,0  2,5 / 2,25 72 / 80
315 2,3 / 2,0 100 / 120
350 2,8 / 2,5 60
350 2,7 / 2,5 80 / 100 / 120
360 2,6 / 2,25 60
360 2,5 / 2,25 80 / 100 / 120 / 140
370 2,4 / 2,0 60
370 2,3 / 2,0 80 / 100 / 120
380 2,6 / 2,25 60
380 2,5 / 2,25 80 / 100 / 120
400 2,7 / 2,5 60 / 80 / 100
420 2,7 / 2,25 50 / 60 / 80 / 100
425 2,7 / 2,25 50 / 60 / 80 / 100
460 2,8 / 2,25 50
460 2,7 / 2,25 60 / 80 / 100 / 120
480 2,7 / 2,25 50 / 60 / 80 / 100
500 3,5 / 3,0 80
520 3,8 / 3,2 50
520 3,0 / 2,5 72 / 80
560 3,8 / 3,2 60
560 3,0 / 2,5 72 / 80
560 3,7 / 3,2 100
560 3,0 / 2,5 120
580 3,2 / 2,7 60 / 72 / 80 / 100
630 3,2 / 2,7 60 / 72 / 80 / 100
650 3,7 / 3,2 80 / 130
750 3,8 / 3,2 60 / 72 / 80 / 100

KINS' RED MT is formerly known as: CX1M

Discover other products

KINS' RED MT Performance

  • Low Tensile

  • Medium Tensile

  • Blade Life

  • Tight Tolerance